NSN 5305-00-038-3233
High Torque Screw
Between 1.125 inches and 1.157 inches fastener length, button head style, 0.500 inches head diameter, head height: 0.125 inches .
Manufacturer part number S2329524-18 for national stock number 5305000383233.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-038-3233.
-
MPN or Model
S2329524-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.297 inches and 0.361 inches -
Fastener Length
Between 1.125 inches and 1.157 inches -
Head Style
Button -
Head Diameter
0.500 inches -
Head Height
0.125 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.796 inches and 0.828 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.000 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-302-6765 MPN 1105239Cont Cable Assembly
- 1560-00-574-7424 MPN 2445916-501Guard
- 1560-00-586-1119 MPN 4435890-505Handle Assy
- 1560-00-628-6128 MPN 5380149-30Tip Assy Wing
- 1560-00-657-5255 MPN 5442559-350Skin
- 5945-01-127-7261 MPN 1D22142-1Solenoid Plunger
- 5950-01-418-9164 MPN 1D54200-503Power Transformer
- 5305-00-151-2521 MPN 1029421-10-16Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-038-3233 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S2329524-18 | Boeing Company, The |
S2329524-18 | Boeing Company, The |