NSN 5305-00-038-8572
High Torque Screw
Between 1.031 inches and 1.078 inches fastener length, flat countersunk head style, between 0.451 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 53B334-9 for national stock number 5305000388572.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-038-8572.
-
MPN or Model
53B334-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.459 inches and 0.526 inches -
Fastener Length
Between 1.031 inches and 1.078 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.451 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-097-9308 MPN 2-34051-1Bell Crank
- 1560-00-097-9308 MPN 2-34051-9Bell Crank
- 1560-00-103-6828 MPN 2-73460-1Horizontal Stabilizer Quadrant
- 1560-00-767-6589 MPN 2-50509-15Duct Elbow Assembly
- 1560-00-836-4308 MPN 3-73176-3Horizontal Stabilizer Quadrant
- 1560-00-977-3770 MPN 2-11801-56Door Plate
- 1560-01-042-2942 MPN 18-10814-601Aircraft Access Door
- 1560-01-042-4708 MPN 14-11233-257Firewall Panel
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-038-8572 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
53B334-9 | Northrop Grumman Systems Corporation |
53B334-9 | Northrop Grumman Technical Services, |
53B334-9 | Northrop Grumman Systems Corporation |