NSN 5305-00-040-9780
High Torque Screw
Between 0.930 inches and 0.960 inches fastener length, flat chamfer head style, between 0.498 inches and 0.500 inches head diameter, head height: between 0.740 inches and 0.760 inches .
Manufacturer part number 39-25088-1 for national stock number 5305000409780.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-040-9780.
-
MPN or Model
39-25088-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.340 inches -
Fastener Length
Between 0.930 inches and 0.960 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.498 inches and 0.500 inches -
Head Height
Between 0.740 inches and 0.760 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.620 inches and 0.640 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
33.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4340 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-386-4465 MPN 35-29710-504Aircraft Door
- 1560-00-394-6421 MPN 35-30382-71Aircraft Structural Panel
- 1560-00-432-3594 MPN 5-95800-42Aircraft Skin
- 1560-00-650-5513 MPN 26-6256Escape Hatch Lifter Seal
- 1560-00-773-8845 MPN 39-7606-800Trailing Shear Plate
- 1560-00-779-7919 MPN 35-8272-68Lower Outboard Angle
- 1560-01-159-5305 MPN 69-16804-2Control Cable Grommet
- 1560-01-191-6905 MPN 458-52388-1Transfer Lever
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-040-9780 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
39-25088-1 | The Boeing Company |