NSN 5305-00-042-6962
Tap Bolt
2nd reply min tensile strength 69000 psi.
Manufacturer part number FFS85TYPE2STYLE10P for national stock number 5305000426962.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-042-6962.
-
MPN or Model
FFS85TYPE2STYLE10P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.000 inches -
Fastener Length
1.000 inches -
Head Style
Hexagon -
Head Height
Between 0.302 inches and 0.323 inches -
Width Between Flats
Between 0.736 inches and 0.750 inches -
Hole Diameter
0.094 inches -
Thread Diameter
0.500 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Hardness Rating
95.5 rockwell b and 100.0 rockwell b -
Minimum Yield Strength
55000 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Material
Steel -
Material Specification
Sae gr 1 or 2 assn standard single material response -
Surface Treatment
Cadmium or zinc -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification 1st treatment response or qq-z-325, type 1, cl 3 federal specification 2nd treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5985-00-113-0772 MPN 11589419Antenna To Antenna Base Adapter
- 5975-00-692-9434 MPN 8391641Flexible Metal Conduit Assembly
- 4820-00-736-0234 MPN 10900509Fluid Pressure Regulating Valve
- 5905-00-741-3431 MPN 7413431Inductive Wire Wound Fixed Resistor
- 5940-00-753-9427 MPN 7539427Terminal Board
- 4820-01-084-1231 MPN 7709347Directional Control Linear Valve Sleeve
- 4820-01-114-7543 MPN 11669104Safety Relief Valve
- 5975-01-168-0475 MPN 12317124Electrical-electronic Equipment Chassis
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-042-6962 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FFS85TYPE2STYLE10P | Federal Specifications |
426962 | General Motors Llc |
7419598 | U S Army Tank Automotive Command |
426962 | General Motors Corp |
426962 | Army Weapons Command |