NSN 5305-00-042-9038
Tap Bolt
Between 7.312 inches and 7.500 inches fastener length, hexagon head style, between 0.531 inches and 0.563 inches head height, width between flats: between 1.285 inches and 1.312 inches .
Manufacturer part number FFS85TYPE2STYLE10P for national stock number 5305000429038.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-042-9038.
-
MPN or Model
FFS85TYPE2STYLE10P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 2.250 inches and 2.438 inches -
Fastener Length
Between 7.312 inches and 7.500 inches -
Head Style
Hexagon -
Head Height
Between 0.531 inches and 0.563 inches -
Width Between Flats
Between 1.285 inches and 1.312 inches -
Hole Diameter
0.125 inches -
Thread Diameter
0.875 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Minimum Yield Strength
120000 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Material
Steel -
Material Specification
Sae gr 8 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-011-3060 MPN 113060Setscrew
- 5305-00-013-8277 MPN 138277Socket Head Cap Screw
- 5305-00-269-6417 MPN 571274Socket Head Cap Screw
- 5935-00-201-6673 MPN 5291603Electrical Receptacle Connector
- 5905-00-501-5171 MPN 1910174Inductive Wire Wound Fixed Resistor
- 4920-00-563-5221 MPN 6799330Interface Device Adapter Assembly
- 4820-00-770-6519 MPN 5153358Check Valve
- 5940-00-707-7753 MPN 1CLug Terminal
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-042-9038 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FFS85TYPE2STYLE10P | Federal Specifications |
429038 | General Motors Llc |
429038 | General Motors Corp |
429038 | Army Weapons Command |