NSN 5305-00-043-0562
High Torque Screw
Retaing element in shank.
Manufacturer part number 7823864-2-03-17 for national stock number 5305000430562.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-043-0562.
-
MPN or Model
7823864-2-03-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.260 inches and 0.307 inches -
Fastener Length
1.474 inches -
Head Style
Pan -
Head Diameter
0.375 inches -
Head Height
Between 0.098 inches and 0.108 inches -
Grip Diameter
Between 0.1840 inches and 0.1860 inches -
Shank Unthreaded Hole Diameter
0.070 inches and 0.080 inches first hole -
Internal Drive Style
Torque -
Thread Diameter
0.190 inches -
Grip Length
Between 1.062 inches and 1.082 inches -
Thready Qty Per Inch (tpi)
32 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.356 inches first hole -
Material
Steel -
Material Specification
1886, fscm 88277 mfr ref single material response -
Thread Series Designator
Unf
More from these suppliers
- 5975-01-087-9650 MPN 53064-5Electrical Components Tiedown Strap
- 5935-01-471-5816 MPN AV703Electrical Plug Connector
- 5305-01-163-5795 MPN SS5112-543Close Tolerance Screw
- 5305-01-194-4591 MPN AS292-4-11Socket Head Cap Screw
- 5306-00-402-3158 MPN AS194-4-37Close Tolerance Bolt
- 1560-00-117-3534 MPN 4114029-13Engine Throttle Control Cable
- 1680-00-148-7541 MPN D115188-501Act Barrel Assembly
- 1560-00-181-3472 MPN 4116338-1Aircraft Fairing
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-043-0562 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7823864-2-03-17 | Boeing Company, The |
7823864-2-03-17 | Avibank Mfg., Inc. |