NSN 5305-00-043-5493
Tap Bolt
Between 1.562 inches and 1.625 inches fastener length, hexagon head style, between 0.150 inches and 0.163 inches head height, width between flats: between 0.428 inches and 0.438 inches .
Manufacturer part number FFS85TYPE2STYLE10P for national stock number 5305000435493.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-043-5493.
-
MPN or Model
FFS85TYPE2STYLE10P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.938 inches -
Fastener Length
Between 1.562 inches and 1.625 inches -
Head Style
Hexagon -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.428 inches and 0.438 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Hardness Rating
95.5 rockwell b and 100.0 rockwell b -
Minimum Yield Strength
55000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.516 inches first hole -
Material
Steel -
Material Specification
Sae gr 1 or 2 assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-254-8114 MPN 1998754Terminal Board
- 4920-00-625-4271 MPN 6796674Turbine Rotor Support
- 4820-00-826-6465 MPN 178779Safety Relief Valve
- 5945-01-521-9598 MPN 97225608Relay Assembly
- 4920-00-862-5714 MPN 6799371Filter Parts Kit
- 5930-00-233-6725 MPN 1390517Push-pull Switch
- 5935-01-107-6658 MPN 8597650-612Electrical Plug Connector
- 5305-00-015-5258 MPN 155258Machine Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-043-5493 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FFS85TYPE2STYLE10P | Federal Specifications |
435493 | General Motors Llc |
435493 | General Motors Corp |