NSN 5305-00-043-8819
Bolt Stove
Between 0.729 inches and 0.750 inches fastener length, flat countersunk undercut head style, between 0.802 inches and 0.875 inches head diameter, head height: between 0.123 inches and 0.160 inches .
Manufacturer part number MS35245-139 for national stock number 5305000438819.
Datasheet
-
Product description
Machine Screw NSN 5305-00-043-8819.
-
MPN or Model
MS35245-139
-
Schedule B
7415.33.8550 (Other copper screws (not for wood) bolts and nuts) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.415 inches and 0.627 inches -
Fastener Length
Between 0.729 inches and 0.750 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.802 inches and 0.875 inches -
Head Height
Between 0.123 inches and 0.160 inches -
Internal Drive Style
Slot -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
13 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Copper alloy -
Screw Material Specification
Qq-b-613 federal specification single material response or qq-b-626 federal specification single material response or qq-w-321 federal specification single material response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-031-4242 MPN MS27473T20A16PElectrical Plug Connector
- 5950-00-031-4560 MPN MS75084-16Radio Frequency Coil
- 4820-00-059-4920 MPN MS28771-12Check Valve
- 5935-00-075-6823 MPN MS3110F16-26SElectrical Receptacle Connector
- 5935-00-087-5869 MPN MS24039-1Electrical Receptacle Connector
- 5935-00-134-0398 MPN M2726-47-002Electrical Connector Insert
- 5940-00-151-9360 MPN MS35437-1Lug Terminal
- 5935-00-173-4990 MPN MS18160-2WElectrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-043-8819 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35245-139 | Military Standards |