NSN 5305-00-046-8345
High Torque Screw
Between 2.381 inches and 2.428 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number BM19019-4-32 for national stock number 5305000468345.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-046-8345.
-
MPN or Model
BM19019-4-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.371 inches and 0.438 inches -
Fastener Length
Between 2.381 inches and 2.428 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Thread Series Designator
Unjf -
Specification Data
08524-b-19019 manufacturers standard
More from these suppliers
- 5305-00-242-4659 MPN HT409A4-23Shoulder Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-199-7826 MPN HT4075V4-7-16Close Tolerance Screw
- 5305-01-210-0790 MPN HT4059V3-10Shoulder Screw
- 5305-01-229-1387 MPN HT4075V4-11-38Close Tolerance Screw
- 5305-01-246-3871 MPN SC1779-4-12Close Tolerance Screw
- 5305-01-303-6352 MPN SC1823-3-6Close Tolerance Screw
- 5305-01-435-6397 MPN SC5063-3-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-046-8345 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM19019-4-32 | Huck International, Inc. |
HT8140-4-32 | Arconic Global Fasteners & Rings, |
HT295-4-32 | Hi-shear Corporation |
106830-4-32 | Sps Technologies, Llc |
HT295-4-32 | Lisi Aerospace Canada Corp |
11905-4-32 | Reid Products Inc. |
ST3M454-4-32 | Boeing Company, The |
106830-4-32 | Sps Technologies Inc |
BM19019-4-32 | Huck Intl Inc |
HT8140-4-32 | Alcoa Global Fasteners, Inc. |