NSN 5305-00-047-2424
High Torque Screw
Between 0.859 inches and 0.906 inches fastener length, flat countersunk head style, between 0.469 inches and 0.474 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number HT8043-5-8 for national stock number 5305000472424.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-047-2424.
-
MPN or Model
HT8043-5-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.349 inches and 0.416 inches -
Fastener Length
Between 0.859 inches and 0.906 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.469 inches and 0.474 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification all treatment responses -
Thread Series Designator
Unf -
Specification Data
26512-gb510l manufacturers standard
More from these suppliers
- 5305-00-080-9483 MPN 3MA123-3-3Machine Screw
- 5305-00-151-6922 MPN CVC241-3-11Machine Screw
- 5305-00-182-9415 MPN SC1708-52Machine Screw
- 5305-00-764-3027 MPN HT408A4-7Machine Screw
- 5305-01-133-2195 MPN ST3M740-4-8Close Tolerance Screw
- 5305-01-167-2408 MPN 51B335-22Close Tolerance Screw
- 5305-01-169-6749 MPN SC1786RV3-2303Close Tolerance Screw
- 5305-01-171-1440 MPN SC1786RV3-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-047-2424 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT8043-5-8 | Arconic Global Fasteners & Rings, |
GB510L5-8 | Northrop Grumman Systems Corporation |
106750-5-8 | Sps Technologies, Llc |
HT239PB5-8 | Hi-shear Corporation |
A147-5-8 | Huck International, Inc. |
HT239PB5-8 | Lisi Aerospace Canada Corp |
BM19025-5-8 | Precision Fastening Sub Omark |
HT8043-5-8 | Alcoa Global Fasteners, Inc. |
GB510L5-8 | Northrop Grumman Systems Corporation |
HT239PB5-8 | Hi-shear Corporation |
106750-5-8 | Sps Technologies, Llc |
HT8043-5-8 | Alcoa Global Fasteners, Inc. |