NSN 5305-00-055-2036
Bolt Stove
Between 1.531 inches and 1.578 inches fastener length, flat countersunk head style, between 1.036 inches and 1.145 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number MS24694C346 for national stock number 5305000552036.
Datasheet
-
Product description
Machine Screw NSN 5305-00-055-2036.
-
MPN or Model
MS24694C346
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.922 inches and 1.000 inches -
Fastener Length
Between 1.531 inches and 1.578 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.036 inches and 1.145 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.562 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Screw Material Specification
66 federal standard all material responses -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-416-6336 MPN NAS1829BT4E14Stud Terminal
- 5940-01-451-2679 MPN NAS1063E3-551ETerminal Board Marker Strip
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-068-0498 MPN MS90725-1Hexagon Head Cap Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-121-7959 MPN MS24629-68Tapping Screw
- 5305-00-151-6198 MPN NAS1300C5T24Thumbscrew
- 5305-00-186-9211 MPN NAS1704-26Shoulder Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-055-2036 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS24694C346 | National Aerospace Standards |
MS24694C346 | Military Standards |