NSN 5305-00-058-7095
Tap Bolt
1.000 inches fastener length, hexagon head style, between 0.302 inches and 0.323 inches head height, width between flats: between 0.736 inches and 0.750 inches .
Manufacturer part number MS51095-112 for national stock number 5305000587095.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-058-7095.
-
MPN or Model
MS51095-112
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.000 inches -
Fastener Length
1.000 inches -
Head Style
Hexagon -
Head Height
Between 0.302 inches and 0.323 inches -
Width Between Flats
Between 0.736 inches and 0.750 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
13 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 32.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate or zinc and chromate -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
2 type and 10p style
More from these suppliers
- 5905-00-006-5494 MPN RNC60H2432FMFilm Fixed Resistor
- 5935-00-038-5798 MPN MS27473E20A2SBElectrical Plug Connector
- 5935-00-093-8231 MPN MS3106F18-9SElectrical Plug Connector
- 5930-00-133-8697 MPN MSR03N6081MCRotary Switch
- 5935-00-164-1728 MPN MS3134E27-50SElectrical Receptacle Connector
- 5935-00-166-9797 MPN MS3100K14S6SElectrical Receptacle Connector
- 5905-00-185-8507 MPN MS35045-110Composition Fixed Resistor
- 5935-00-201-5505 MPN MS3106A36-8SZElectrical Plug Connector
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-058-7095 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS51095-112 | Military Standards |