NSN 5305-00-060-9253
High Torque Screw
Between 0.511 inches and 0.541 inches fastener length, flat chamfer head style, between 0.306 inches and 0.313 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1123-4H for national stock number 5305000609253.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-060-9253.
-
MPN or Model
NAS1123-4H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.511 inches and 0.541 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.306 inches and 0.313 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Hole Diameter
Between 0.034 inches and 0.042 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium or chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5975-00-671-5938 MPN NAS622CE3Hook
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5940-01-413-3005 MPN NAS1063B1-7Terminal Board Marker Strip
- 5305-00-007-3020 MPN NAS1102C02-4PMachine Screw
- 5305-00-050-6824 MPN MS24677-76Socket Head Cap Screw
- 5305-00-057-0522 MPN MS51958-26Machine Screw
- 5305-00-080-0064 MPN NAS1352-04-4PSocket Head Cap Screw
- 5305-00-126-2737 MPN MS35308-488Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-060-9253 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1123-4H | National Aerospace Standards |