NSN 5305-00-061-5496
High Torque Screw
Between 1.187 inches and 1.234 inches fastener length, flat countersunk head style, between 0.555 inches and 0.560 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number HT239PB6-13 for national stock number 5305000615496.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-061-5496.
-
MPN or Model
HT239PB6-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.365 inches and 0.432 inches -
Fastener Length
Between 1.187 inches and 1.234 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.555 inches and 0.560 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification all treatment responses -
Thread Series Designator
Unf -
Specification Data
26512-gb510l manufacturers standard
More from these suppliers
- 5305-00-505-3954 MPN LS15267V3-26Machine Screw
- 5305-01-044-2244 MPN HT4020-4-9Close Tolerance Screw
- 5305-01-158-5371 MPN 3M893-3-9Machine Screw
- 5305-01-158-6762 MPN SC2163-3-8Machine Screw
- 5305-01-209-7199 MPN ST3M733-4L22Close Tolerance Screw
- 5305-01-247-6837 MPN SCD1780-5-16Close Tolerance Screw
- 5305-01-338-3148 MPN HT4075D7-22-92Close Tolerance Screw
- 5306-00-288-2296 MPN VS3060-4-7Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-061-5496 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT239PB6-13 | Hi-shear Corporation |
HT8043-6-13 | Arconic Global Fasteners & Rings, |
HT239PB6-13 | Lisi Aerospace Canada Corp |
GB510L6-13 | Northrop Grumman Systems Corporation |
106750-6-13 | Sps Technologies, Llc |
A147-6-13 | Huck International, Inc. |
BM19025-6-13 | Huck Intl Inc |
HT8043-6-13 | Alcoa Global Fasteners, Inc. |
BM19025-6-13 | Huck International, Inc. |
GB510L6-13 | Northrop Grumman Systems Corporation |
HT239PB6-13 | Hi-shear Corporation |
106750-6-13 | Sps Technologies, Llc |
HT8043-6-13 | Alcoa Global Fasteners, Inc. |