NSN 5305-00-065-6337
Panel Screw
Between 0.910 inches and 0.930 inches fastener length, pan no. 2 head style, between 0.290 inches and 0.310 inches head diameter, head height: between 0.050 inches and 0.060 inches .
Manufacturer part number 135B5764 for national stock number 5305000656337.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-065-6337.
-
MPN or Model
135B5764
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
10 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.350 inches -
Fastener Length
Between 0.910 inches and 0.930 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.290 inches and 0.310 inches -
Head Height
Between 0.050 inches and 0.060 inches -
First Diameter From Head
Between 0.192 inches and 0.196 inches -
Second Diameter From Head
Between 0.156 inches and 0.160 inches -
Third Diameter From Head
Between 0.192 inches and 0.196 inches -
Fourth Diameter From Head
Between 0.156 inches and 0.160 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.160 inches and 0.180 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Externally Relieved Body Diameter Quantity
4 -
Material
Steel -
Material Specification
Qq-s-624 federal specification single material response -
Surface Treatment
Chromium -
Surface Treatment Specification
Mil-std 171, fin. 1.2.2 military standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-01-090-0063 MPN 201F991Armame Test Console
- 5305-01-425-6265 MPN 12374504Setscrew
- 5320-01-258-6058 MPN 176C2845-7Blind Rivet
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-065-6337 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
135B5764 | General Dynamics-ots, Inc. |