NSN 5305-00-071-1319
Bolt Stove
Between 0.219 inches and 0.250 inches fastener length, flat countersunk undercut head style, between 0.340 inches and 0.385 inches head diameter, head height: between 0.068 inches and 0.081 inches .
Manufacturer part number 418214-61 for national stock number 5305000711319.
Datasheet
-
Product description
Machine Screw NSN 5305-00-071-1319.
-
MPN or Model
418214-61
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.188 inches and 0.250 inches -
Fastener Length
Between 0.219 inches and 0.250 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.340 inches and 0.385 inches -
Head Height
Between 0.068 inches and 0.081 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Screw Material Specification
66 federal standard all material responses -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-143-4794 MPN 011-001965-112Lug Terminal
- 5940-00-231-9288 MPN 88A981Terminal Board
- 5905-00-428-2066 MPN 023-000950-067Film Fixed Resistor
- 5905-00-431-5225 MPN 446-035010-000Wire Wound Fixed Resistor
- 5945-00-869-1232 MPN 216-004-029Coil Assembly Inc 0
- 5940-01-360-0097 MPN 008-013903-001Terminal Board
- 4920-01-579-8525 MPN 087-019731-0002Electrical Interface Device Cable Assembly
- 5930-00-135-7351 MPN 46-024391-201Push Switch
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-071-1319 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
418214-61 | Raytheon Company |
MS51960-61 | Military Standards |
FFS92TYPE3STYLE2C | Federal Specifications |
003-007861-061 | Northrop Grumman Systems Corporation |
41814-61 | Raytheon Company |