NSN 5305-00-071-2057
Tap Bolt
Weapon system essential.
Manufacturer part number 1741AS278-131 for national stock number 5305000712057.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-071-2057.
-
MPN or Model
1741AS278-131
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.125 inches and 1.313 inches -
Fastener Length
Between 1.938 inches and 2.000 inches -
Head Style
Hexagon -
Head Height
Between 0.272 inches and 0.291 inches -
Width Between Flats
Between 0.612 inches and 0.625 inches -
Thread Diameter
0.438 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Criticality Code Justification
Feat -
Surface Finish
63.0 microinches threads -
Material
Steel -
Material Specification
Sae j429 grade 8 assn standard single material response or astm a354 grade bd assn standard single material response -
Surface Treatment
Zinc and chromate -
Surface Treatment Specification
Astm b633 type 2 sc 3 assn standard single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-197-3215 MPN 145AS518-1850Film Fixed Resistor
- 4920-00-481-6171 MPN 68A75D265Drive Flange Adapter Set
- 5905-00-901-4602 MPN 64A6A11-392160A21Noninductive Wire Wound Fixed Resistor
- 5930-01-025-7173 MPN 604AS305-11Pressure Switch
- 4920-01-108-4709 MPN 1164AS184Readout Module
- 5950-01-321-8142 MPN 1065AS302-6Radio Frequency Coil
- 5975-01-340-7513 MPN 1551AS220-10Electrical-electronic Equipment Chassis
- 5930-01-341-3490 MPN 247ASC0341-003Push Switch
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-071-2057 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1741AS278-131 | Naval Air Systems Command |
B1821BH044C200N | American National Standards |
MS90728-91 | Military Standards |
5305PL0657096 | Inspektorat Wsparcia Sil Zbrojnych |