NSN 5305-00-071-2058
Tap Bolt
Between 2.156 inches and 2.250 inches fastener length, between 0.272 inches and 0.291 inches head height, between 0.612 inches and 0.625 inches width between flats, thread diameter: 0.438 inches.
Manufacturer part number B1821BH044C225N for national stock number 5305000712058.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-071-2058.
-
MPN or Model
B1821BH044C225N
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.125 inches and 1.313 inches -
Fastener Length
Between 2.156 inches and 2.250 inches -
Head Height
Between 0.272 inches and 0.291 inches -
Width Between Flats
Between 0.612 inches and 0.625 inches -
Thread Diameter
0.438 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Surface Finish
63.0 microinches threads -
Material
Steel -
Material Specification
Sae j429 grade 8 assn standard single material response or astm a354 grade bd assn standard single material response -
Surface Treatment
Zinc and chromate -
Surface Treatment Specification
Astm b633 type 2 sc 3 assn standard single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-557-2345 MPN 200056Lug Terminal
- 5305-00-010-0055 MPN 100055Hexagon Head Cap Screw
- 5306-00-042-6925 MPN 426925Machine Bolt
- 5930-00-447-7654 MPN 615TRSwitch
- 4820-01-051-9841 MPN 2AX833Valve Body
- 4820-01-161-0149 MPN 1384650Check Valve
- 5935-01-180-8593 MPN 2BD6Male Connector
- 5945-01-187-7853 MPN 2249430Electromagnetic Relay
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-071-2058 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
B1821BH044C225N | American National Standards |
FF-S-85 | Federal Specifications |
1639600 | Oshkosh Corporation |
MS90725-92 | Military Standards |
MS90728-92 | Military Standards |
106338 | Army Weapons Command |
179867 | Army Weapons Command |
5305000695576 | E.c.a Etablissement |
1639600 | Oshkosh Defense, Llc |
10389769 | Nimikkeistokeskus Ncb Finland |
5305000695576 | E.c.a Etablissement Central |