NSN 5305-00-071-2229
Tap Bolt
4.000 inches fastener length, hexagon head style, between 0.150 inches and 0.163 inches head height, width between flats: between 0.428 inches and 0.438 inches .
Manufacturer part number MS90725-22 for national stock number 5305000712229.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-071-2229.
-
MPN or Model
MS90725-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Length
Between 0.750 inches and 0.938 inches -
Fastener Length
4.000 inches -
Head Style
Hexagon -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.428 inches and 0.438 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 32.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 5940-01-428-6495 MPN NAS1063F1-6Terminal Board Marker Strip
- 1680-01-668-8056 MPN NAS354-5-170Aircraft Control Tube Assembly
- 5305-00-008-9058 MPN NAS1102E04-3PMachine Screw
- 5305-00-020-3625 MPN NAS1100E06-6Machine Screw
- 5305-00-042-9478 MPN MS90725-90Hexagon Head Cap Screw
- 5305-00-225-8476 MPN MS24693-S144Machine Screw
- 5305-00-225-8477 MPN MS24693-S146Machine Screw
- 5305-00-269-2797 MPN MS90726-54Hexagon Head Cap Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-071-2229 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS90725-22 | National Aerospace Standards |
MS90725-22 | Military Standards |
Stock Check
- NS: 9452
- NE: 286