NSN 5305-00-071-2240
Tap Bolt
1.375 inches fastener length, hexagon head style, between 0.150 inches and 0.163 inches head height, width between flats: between 0.428 inches and 0.438 inches .
Manufacturer part number FF-S-85 for national stock number 5305000712240.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-071-2240.
-
MPN or Model
FF-S-85
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.375 inches -
Fastener Length
1.375 inches -
Head Style
Hexagon -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.428 inches and 0.438 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Minimum Yield Strength
85000 pounds per square inch -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 4920-01-554-4253 MPN NAS1057T3B-213Aircr Sleeve Spacer
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-019-9468 MPN NAS1351-3LN10Socket Head Cap Screw
- 5305-00-052-9971 MPN MS24619-25Tapping Screw
- 5305-00-059-3674 MPN MS51958-78Machine Screw
- 5305-00-163-6802 MPN NAS1121E15Close Tolerance Screw
- 5305-00-186-9211 MPN NAS1704-26Shoulder Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-071-2240 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FF-S-85 | Federal Specifications |
MS90725-11 | National Aerospace Standards |
MS90725-11 | Military Standards |