NSN 5305-00-074-4469
High Torque Screw
Between 1.064 inches and 1.094 inches fastener length, flat countersunk head style, between 0.704 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1156-11 for national stock number 5305000744469.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-074-4469.
-
MPN or Model
NAS1156-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.416 inches -
Fastener Length
Between 1.064 inches and 1.094 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1156 professional/industrial association standard
More from these suppliers
- 5940-00-455-0005 MPN NAS1745-12Conductor Splice
- 5940-01-435-3630 MPN NAS1063A6-510ATerminal Board Marker Strip
- 5905-01-604-0709 MPN 4610X-101-154LFFilm Fixed Resistor Network
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-116-1491 MPN NAS1625-5Machine Screw
- 5305-00-165-8004 MPN MS3212-55Machine Screw
- 5305-00-237-6511 MPN NAS1189C06P8Socket Head Cap Screw
- 5305-00-269-4511 MPN MS90725-63Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-074-4469 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1156-11 | National Aerospace Standards |