NSN 5305-00-079-7985
Bolt Stove
Between 1.766 inches and 1.812 inches fastener length, flat countersunk head style, between 0.686 inches and 0.762 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number MS24694S203 for national stock number 5305000797985.
Datasheet
-
Product description
Machine Screw NSN 5305-00-079-7985.
-
MPN or Model
MS24694S203
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.573 inches and 0.734 inches -
Fastener Length
Between 1.766 inches and 1.812 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.686 inches and 0.762 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 8740 or steel comp 8630 -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416 type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-01-525-5016 MPN NAS5312E3-6JSix Lobe Recess Scr
- 5940-01-614-7617 MPN NAS1063C10-210KTerminal Board Marker Strip
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-007-6198 MPN NAS1631C26PMachine Screw
- 5305-00-022-3131 MPN NAS1352-3LL32PSocket Head Cap Screw
- 5305-00-052-4032 MPN NAS1351-7LE16PSocket Head Cap Screw
- 5305-00-079-5832 MPN NAS514-632-6Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-079-7985 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS24694S203 | National Aerospace Standards |
MS24694S203 | Military Standards |