NSN 5305-00-082-6730
Bolt Stove
0.500 inches fastener length, flat countersunk head style, between 0.556 inches and 0.635 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number MS24693-S316 for national stock number 5305000826730.
Datasheet
-
Product description
Machine Screw NSN 5305-00-082-6730.
-
MPN or Model
MS24693-S316
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.251 inches -
Fastener Length
0.500 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.556 inches and 0.635 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
60000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel -
Screw Material Specification
Qq-s-633 federal specification single material response -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf -
Nondefinitive Specification/std Data
3 type and 3c style
More from these suppliers
- 5935-00-024-0561 MPN MS27513E10B13SElectrical Receptacle Connector
- 5950-00-051-1129 MPN MS91189-17Radio Frequency Coil
- 5935-00-080-2641 MPN MS3114H20-16PElectrical Receptacle Connector
- 5935-00-081-5945 MPN MS3101R28-21SZElectrical Plug Connector
- 5905-00-106-1245 MPN RC32GF272JComposition Fixed Resistor
- 5935-00-109-0662 MPN MS24266Electrical Plug Connector
- 5930-00-110-1113 MPN MS25089-1GRPush Switch
- 5940-00-113-9828 MPN MS25036-048Lug Terminal
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-082-6730 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS24693-S316 | Military Standards |