NSN 5305-00-083-4614
High Torque Screw
Between 0.573 inches and 0.619 inches fastener length, flat countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HT202PB3-5 for national stock number 5305000834614.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-083-4614.
-
MPN or Model
HT202PB3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.317 inches -
Fastener Length
Between 0.573 inches and 0.619 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-003-1570 MPN A51B27553-13Inlet Duct Fitting
- 5935-00-008-4266 MPN GC831G50SPElectrical Receptacle Connector
- 1560-00-066-6339 MPN 123EC10058-7Duct Elbow Assembly
- 1560-00-075-8236 MPN 128WP10033-3Hi Fairing Assembly
- 1560-00-092-3256 MPN 88596-1Engine Cowling Lug
- 4920-00-116-1359 MPN 128SEME70175-1Shelter Window Assy
- 5985-00-144-8167 MPN 123SCAV5068-21Radio Frequency Transmission Line Section
- 5935-00-156-0269 MPN GC801AFB12-8SElectrical Receptacle Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-083-4614 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT202PB3-5 | Hi-shear Corporation |
HT202PB3-5 | Lisi Aerospace Canada Corp |
GB510AK3-5 | Northrop Grumman Systems Corporation |
NAS1581C3H5P | National Aerospace Standards |