NSN 5305-00-089-9445
High Torque Screw
Between 2.418 inches and 2.438 inches fastener length, crowned hexagon head style, between 0.126 inches and 0.141 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 202-15500-4-32 for national stock number 5305000899445.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-089-9445.
-
MPN or Model
202-15500-4-32
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Direction
Right-hand -
Thread Length
Between 0.402 inches and 0.438 inches -
Fastener Length
Between 2.418 inches and 2.438 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 2.000 inches and 2.016 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
39.0 rockwell c fastener and 45.0 rockwell c fastener -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.323 inches first hole and 2.343 inches first hole -
Surface Treatment
Passivate spring -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response fastener -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-054-1537 MPN CVC606ZAE19SYElectrical Plug Connector
- 1560-00-106-6852 MPN 215-36336-3Engine Screen Assembly
- 4920-00-133-4419 MPN 218-01913-1Fire Control System Test Set
- 5935-00-402-7330 MPN 202-26233-12SElectrical Plug Connector
- 1560-00-431-0692 MPN 216-28324-2Support Assy
- 1560-00-446-3944 MPN 216-39401-1Small Arms-fragmentation Protective Supplemental Armor
- 5930-00-482-4196 MPN 215-99101-1Lanyard Assembly Switch
- 1560-00-565-4051 MPN 215-30313-4Longeron
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-089-9445 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
202-15500-4-32 | Triumph Aerostructures, Llc |
CA4850-04-32 | Lockheed Martin Corporation |
AS04-32 | Avibank Mfg., Inc. |
VP1072-4-32 | Alcoa Global Fasteners, Inc. |