NSN 5305-00-090-4097
High Torque Screw
Between 1.353 inches and 1.373 inches fastener length, flat chamfer head style, between 0.610 inches and 0.625 inches head diameter, head height: between 0.157 inches and 0.172 inches .
Manufacturer part number AS116-05-14 for national stock number 5305000904097.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-090-4097.
-
MPN or Model
AS116-05-14
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.357 inches -
Fastener Length
Between 1.353 inches and 1.373 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.610 inches and 0.625 inches -
Head Height
Between 0.157 inches and 0.172 inches -
Locking Feature
Detent ball fastener -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.875 inches and 0.891 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.240 inches and 1.260 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-599-1023 MPN CA21094-3-20HSStud B980 Nrp
- 5305-01-020-0871 MPN CA2652-04-38Close Tolerance Screw
- 1680-01-524-1333 MPN NAS1375A04SB07Aircr Air Duct Hose
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5305-00-001-4752 MPN NAS1014-48AHexagon Head Cap Screw
- 5305-00-007-0208 MPN NAS1100C00-5Machine Screw
- 5305-00-020-0397 MPN MS27039-4-33Machine Screw
- 5305-00-058-4065 MPN NAS1133-4Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-090-4097 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS116-05-14 | Avibank Mfg., Inc. |
MS21125-0514 | National Aerospace Standards |
MS21125-0514 | Military Standards |
CA2652-05-14 | Arconic Global Fasteners & Rings, |
AS116-05-14 | Avibank Mfg., Inc. |
CA2652-05-14 | Arconic Global Fasteners & Rings, |