NSN 5305-00-093-6683
High Torque Screw
Between 1.481 inches and 1.501 inches fastener length, flat chamfer head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.126 inches and 0.141 inches .
Manufacturer part number MS21125-417 for national stock number 5305000936683.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-093-6683.
-
MPN or Model
MS21125-417
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.293 inches and 0.314 inches -
Fastener Length
Between 1.481 inches and 1.501 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.126 inches and 0.141 inches -
Locking Feature
Detent ball fastener -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 1.062 inches and 1.078 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.385 inches first hole and 1.405 inches first hole -
Surface Finish
32.0 microinches grip -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-078-8046 MPN CA2658-5-Close Tolerance Screw
- 5305-01-101-0288 MPN CA13170-3-3-9Panel Screw Assembly
- 5305-01-183-5805 MPN CA21017-4-03Socket Head Cap Screw
- 5305-01-195-9069 MPN CA21017-4-13Close Tolerance Screw
- 5306-01-537-4638 MPN CA22027-5-24-19Internal Wrenching Bolt
- 5935-00-009-3157 MPN MS3476E20-41SElectrical Plug Connector
- 4820-00-022-2339 MPN MS28051-1Flow Control Valve
- 5935-00-043-4131 MPN MS24264R10T5PNElectrical Receptacle Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-093-6683 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21125-417 | Military Standards |
CA2651-4-17 | Arconic Global Fasteners & Rings, |