NSN 5305-00-094-6869
High Torque Screw
0.706 inches fastener length, fillister countersunk head style, between 0.2966 inches and 0.3016 inches head diameter, head height: 0.013 inches .
Manufacturer part number ST3M455-3-6-1 for national stock number 5305000946869.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-094-6869.
-
MPN or Model
ST3M455-3-6-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.269 inches -
Fastener Length
0.706 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.2966 inches and 0.3016 inches -
Head Height
0.013 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-103-8817 MPN 11883-3-4/11883-3L4Close Tolerance Screw
- 5305-01-141-7914 MPN 11911-4-51-1Shoulder Screw
- 5305-01-237-2782 MPN 11935-4L-11Close Tolerance Screw
- 5305-01-462-2724 MPN 11827V3-10AClose Tolerance Screw
- 5305-01-477-5968 MPN 11825V4-18AClose Tolerance Screw
- 5306-01-476-6950 MPN 11829L4-11FClose Tolerance Bolt
- 5320-00-280-3581 MPN TLV100-4-11EPin-rivet
- 5320-00-929-9193 MPN TL100-4-22Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-094-6869 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M455-3-6-1 | Boeing Company, The |
11907-3-6-1 | Reid Products Inc. |