NSN 5305-00-099-7643
High Torque Screw
Between 2.043 inches and 2.063 inches fastener length, flat chamfer head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.126 inches and 0.141 inches .
Manufacturer part number AS116-04-26 for national stock number 5305000997643.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-099-7643.
-
MPN or Model
AS116-04-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 2.043 inches and 2.063 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.126 inches and 0.141 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.625 inches and 1.641 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.948 inches and 1.968 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 302 spring -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-082-8243 MPN CA2658-3-05Close Tolerance Screw
- 5940-00-056-8303 MPN NAS706T4Feedthru Terminal
- 5940-01-652-3066 MPN NAS1063C4-115RATerminal Board Marker Strip
- 5940-01-437-8564 MPN NAS1063A2-107CYTerminal Board Marker Strip
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-006-6574 MPN MS90725-600Hexagon Head Cap Screw
- 5305-00-053-1079 MPN MS35199-42Machine Screw
- 5305-00-186-5056 MPN NAS1351-5-28Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-099-7643 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS116-04-26 | Avibank Mfg., Inc. |
MS21125-0426 | National Aerospace Standards |
MS21125-0426 | Military Standards |
CA2652-04-26 | Arconic Global Fasteners & Rings, |
AS116-04-26 | Avibank Mfg., Inc. |
CA2652-04-26 | Arconic Global Fasteners & Rings, |