NSN 5305-00-100-1427
High Torque Screw
Head and shank primer coated.
Manufacturer part number 3MFR584-12 for national stock number 5305001001427.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-100-1427.
-
MPN or Model
3MFR584-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.203 inches and 1.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.5018 inches and 0.5066 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-046-2614 MPN 2443871Lever Assy
- 5935-00-059-2877 MPN 5M806P15-19PElectrical Plug Connector
- 1560-00-067-0105 MPN 32-32257-7Bellmouth Ring
- 1560-00-140-9506 MPN 32-33138-603Aircraft Frame
- 1560-00-201-6155 MPN 32-21170-5Stabilizer Rib Retainer
- 1560-00-213-5845 MPN 32-21206-3Airfoil Rib
- 1680-00-283-8248 MPN 68A640043-1003Bell Crank
- 5935-00-457-8230 MPN ST5M1396-1SElectrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-100-1427 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MFR584-12 | Boeing Company, The |