NSN 5305-00-101-5693
High Torque Screw
Primer coat applied to head.
Manufacturer part number 3MFRA583-11 for national stock number 5305001015693.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-101-5693.
-
MPN or Model
3MFRA583-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
Between 1.078 inches and 1.125 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3765 inches and 0.3813 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Surface Treatment
Cadmium head -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response head -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-130-9270 MPN 53-13013-4Speedbrake Spar Fitting
- 1560-00-140-6563 MPN 32-32081-766Airframe Shroud
- 1560-00-232-4107 MPN 32-11193-9Aircraft Skin
- 1680-00-249-4024 MPN 68A640061-2003Steering Car Piston
- 1560-00-283-8114 MPN 68A113055-2016Chordwise Plate
- 4820-00-393-4771 MPN 68-410054-213Manifold Valve Assembly
- 1560-00-518-7827 MPN 53-14011-9Safety Lock Bracket
- 1560-00-521-4418 MPN 53-64021-2Bellcrank Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-101-5693 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MFRA583-11 | Boeing Company, The |