NSN 5305-00-101-5696
High Torque Screw
Primer coat applied to head.
Manufacturer part number 3MFRA583-13 for national stock number 5305001015696.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-101-5696.
-
MPN or Model
3MFRA583-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
Between 1.203 inches and 1.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3765 inches and 0.3813 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Surface Treatment
Cadmium head -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response head -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-084-4852 MPN 53E110045-1Interface Device Adapter Assembly
- 1560-00-088-9122 MPN 32-411520-301Support Assy
- 1560-00-176-1325 MPN 32-15547-10Rib Fold Fitting
- 1560-00-197-3705 MPN 32-19425-3Aircraft Bracket
- 1560-00-219-4780 MPN 68A115113-2011Aircraft Skin
- 1560-00-253-9354 MPN 68A328041-2007Aft Ramp Hinge Scissors Support
- 1560-00-312-3007 MPN 68A323102-2021Aircraft Skin
- 1560-00-477-1532 MPN 32-21186-72Stabilizer Nut Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-101-5696 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MFRA583-13 | Boeing Company, The |