NSN 5305-00-101-5701
High Torque Screw
Primer coat applied to head.
Manufacturer part number HT4062-3-9 for national stock number 5305001015701.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-101-5701.
-
MPN or Model
HT4062-3-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
Between 0.952 inches and 0.999 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3765 inches and 0.3813 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Surface Treatment
Cadmium head and chromate head -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response head -
Thread Series Designator
Unf
More from these suppliers
- 5985-01-541-1212 MPN CWS0001-02Antenna Subassembly
- 5305-00-820-0751 MPN 51B222-2Machine Screw
- 5305-01-034-6624 MPN NAS1189E04P5BSocket Head Cap Screw
- 5305-01-076-4932 MPN HT4020-5-9AXShoulder Screw
- 5305-01-082-8702 MPN NAS1189-02P10BSocket Head Cap Screw
- 5305-01-141-7193 MPN HT4020-6-10AYShoulder Screw
- 5305-01-142-9421 MPN HT4049-5-12XShoulder Screw
- 5305-01-218-1447 MPN HT4059V5-6ASShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-101-5701 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4062-3-9 | Huck International, Inc. |
HT4062-3-9 | Sps Technologies, Llc |
HT4062-3-9 | Hi-shear Corporation |
HT4062-3-9 | Alcoa Global Fasteners, Inc. |
HT4062-3-9 | Lisi Aerospace Canada Corp |
3MA583-9 | Boeing Company, The |
3MFRA583-9 | Boeing Company, The |
3MA5A3-9 | Sey Tec, Inc. |
3MA5A3-9 | Boeing Company, The |
3MA5A3-9 | Aerospec Fasteners Inc. |