NSN 5305-00-101-5708
High Torque Screw
Primer coat applied to head.
Manufacturer part number 3MFRA585-39 for national stock number 5305001015708.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-101-5708.
-
MPN or Model
3MFRA585-39
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.448 inches -
Fastener Length
Between 2.952 inches and 2.999 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.6287 inches and 0.6335 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 2.428 inches and 2.448 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-147-0261 MPN 5M1035Sensitive Switch
- 1560-00-148-9178 MPN 53-010524-5Fitting Assembly
- 1560-00-151-4163 MPN 32-11021-44Aircraft Skin
- 5985-00-172-6279 MPN 32-87850-95Waveguide Assembly
- 1560-00-173-3956 MPN 53G970838-25Aircraft Skin
- 1560-00-231-1525 MPN 32-19478-302Aircraft Access Cover
- 1560-00-282-0976 MPN 68A331045-2011Missile Launcher Support
- 1560-00-427-9106 MPN 32-17022-62Airfoil Rib
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-101-5708 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MFRA585-39 | Boeing Company, The |