NSN 5305-00-102-4552
High Torque Screw
Between 2.766 inches and 2.813 inches fastener length, modified pan head style, 0.375 inches head diameter, head height: between 0.098 inches and 0.108 inches .
Manufacturer part number MS27039-4-44 for national stock number 5305001024552.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-102-4552.
-
MPN or Model
MS27039-4-44
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.501 inches and 0.578 inches -
Fastener Length
Between 2.766 inches and 2.813 inches -
Head Style
Modified pan -
Head Diameter
0.375 inches -
Head Height
Between 0.098 inches and 0.108 inches -
Grip Diameter
Between 0.2460 inches and 0.2490 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 2.235 inches and 2.265 inches -
Thready Qty Per Inch (tpi)
28 -
Minimum Yield Strength
125000 pounds per square inch -
Material
Steel comp 4037 -
Material Specification
Ams6300 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-508-0291 MPN NAS543-2ASwitch
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5935-01-577-3543 MPN MS27488-20Electrical Connector End Seal Plug
- 5940-01-660-0092 MPN NAS1063Terminal Board Marker Strip
- 5305-00-032-3692 MPN NAS1352-06LL10PSocket Head Cap Screw
- 5305-00-047-3137 MPN NAS1351-04H8Socket Head Cap Screw
- 5305-00-058-4012 MPN MIL-S-7839Machine Screw
- 5305-00-059-8264 MPN MS35214-39Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-102-4552 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27039-4-44 | National Aerospace Standards |
MS27039-4-44 | Military Standards |