NSN 5305-00-105-6881
High Torque Screw
Aluminum grommet .012 in. Thk on bearing surface of head.
Manufacturer part number 51B293-4 for national stock number 5305001056881.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-105-6881.
-
MPN or Model
51B293-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.219 inches and 0.317 inches -
Fastener Length
Between 0.510 inches and 0.557 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.375 inches and 0.387 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 430fse or steel comp 81b45 or steel comp 4140 or steel comp 302b -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-902-2142 MPN AIC813-08-R38Machine Screw
- 5305-01-056-4414 MPN C7984-3-16Close Tolerance Screw
- 5305-01-074-2077 MPN AIC811-06-16Socket Head Cap Screw
- 5305-01-096-1240 MPN AIC811-3-20Socket Head Cap Screw
- 5305-01-349-4191 MPN AIC1652-3-2Close Tolerance Screw
- 5305-01-444-1047 MPN AIC1652-5-16AClose Tolerance Screw
- 5305-01-512-8359 MPN TX1027C5-18AClose Tolerance Screw
- 5305-01-627-4278 MPN JSFB34V3-41Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-105-6881 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B293-4 | Sps Technologies, Llc |
51B293-4 | Northrop Grumman Technical Services, |
51B293-4 | Sps Technologies, Llc |
51B293-4 | Monadnock Company, The |
51B293-4 | Hi-shear Corporation |
51B293-4 | Lisi Aerospace Canada Corp |
51B293-4 | Huck International, Inc. |
51B293-4 | Huck Intl Inc |
51B293-4 | Northrop Grumman Systems Corporation |
51B293-4 | Arconic Global Fasteners & Rings, |
51B293-4 | Sps Technologies, Llc |
51B293-4 | Alcoa Global Fasteners, Inc. |
51B293-4 | Northrop Grumman Systems Corporation |