NSN 5305-00-107-1985
High Torque Screw
Aluminum grommet 0.012 in. Thk on bearing surface of head.
Manufacturer part number 51B294-5 for national stock number 5305001071985.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-107-1985.
-
MPN or Model
51B294-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.254 inches and 0.357 inches -
Fastener Length
Between 0.612 inches and 0.659 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.496 inches and 0.510 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 430fse or steel comp 81b45 or steel comp 4140 or steel comp 302b -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-069-8045 MPN 6-70022-1Utility Lightwell
- 1560-00-124-3532 MPN RK0133Wing Spar Parts Kit
- 1560-00-404-8127 MPN 14-12331-5Firewall Panel
- 1560-00-779-6879 MPN 2-24131-605Aircraft Access Cover
- 1560-01-516-5191 MPN 6-11450-325Aircraft Structural Component Support
- 1560-00-960-7961 MPN 3-55307-17Plenum Cover
- 1560-00-754-4126 MPN 3-13206-3Canopy Edge Strip
- 5306-00-840-7246 MPN 51B464-9A7Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-107-1985 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B294-5 | Northrop Grumman Technical Services, |
150005-5 | Monadnock Company, The |
51B294-5 | Northrop Grumman Systems Corporation |