NSN 5305-00-107-9192
High Torque Screw
Between 0.659 inches and 0.691 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 110121T3-5 for national stock number 5305001079192.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-107-9192.
-
MPN or Model
110121T3-5
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.337 inches and 0.389 inches -
Fastener Length
Between 0.659 inches and 0.691 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Titanium alloy -
Material Specification
Nas 621, 6al-4v assn standard 1st material response or ams 4928 assn standard 2nd material response -
Thread Series Designator
Unf
More from these suppliers
- 1680-01-535-6804 MPN 3M1318-6-8-2Turnlock Receptacle
- 5305-00-107-1989 MPN NAS1189-04P3Socket Head Cap Screw
- 5305-00-283-4585 MPN 110179-4-5ASClose Tolerance Screw
- 5305-00-316-7677 MPN 106752-04-153CMachine Screw
- 5305-00-827-4422 MPN NAS1203-38Close Tolerance Screw
- 5305-00-916-4841 MPN SFT22-4-9Machine Screw
- 5305-01-027-4660 MPN HT4020-4-7Close Tolerance Screw
- 5305-01-031-1444 MPN 38030-92C-3DSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-107-9192 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
110121T3-5 | Sps Technologies, Llc |