NSN 5305-00-112-1247
High Torque Screw
Aluminum grommet 0.012 in. Thk on bearing surface of head.
Manufacturer part number 150005-7 for national stock number 5305001121247.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-112-1247.
-
MPN or Model
150005-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.264 inches and 0.347 inches -
Fastener Length
Between 0.712 inches and 0.775 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.496 inches and 0.510 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 8740 or steel comp 6150 or steel comp 4140 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-5626 military specification 4th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-177-5688 MPN CVC241-3-14Machine Screw
- 5305-00-912-4816 MPN NAS1101C3H4Machine Screw
- 5305-01-012-2012 MPN A1C812-04-12Machine Screw
- 5305-01-012-2012 MPN AIC812-04-12Machine Screw
- 5305-01-107-0035 MPN AIC984-4-11PClose Tolerance Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-358-9552 MPN BACS12GU3K18Machine Screw
- 5305-01-451-7615 MPN LD111-0046-2412Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-112-1247 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
150005-7 | Monadnock Company, The |
51B294-7 | Northrop Grumman Technical Services, |
51B294-7 | Northrop Grumman Systems Corporation |
51B294-7 | Arconic Global Fasteners & Rings, |
51B294-7 | Sps Technologies, Llc |
51B294-7 | Sps Technologies, Llc |
51B294-7 | Hi-shear Corporation |
51B294-7 | Sps Technologies, Llc |
51B294-7 | Alcoa Global Fasteners, Inc. |
51B294-7 | Lisi Aerospace Canada Corp |
51B294-7 | Northrop Grumman Systems Corporation |