NSN 5305-00-113-6216
High Torque Screw
Between 0.323 inches and 0.353 inches fastener length, flat countersunk head style, between 0.270 inches and 0.302 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 7S37S3A1 for national stock number 5305001136216.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-113-6216.
-
MPN or Model
7S37S3A1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.323 inches and 0.353 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.270 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
190000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel -
Material Specification
Lb0160-133 fscm 43999 mfr ref single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
La0110-006 fscm 43999 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-035-4032 MPN 192-310113-2Aircraft Structural Plate
- 1560-00-035-4149 MPN 192-31936-6Engine Support Arm Assembly
- 1560-00-078-6479 MPN 152-13028-21Aircraft Structural Component Bracket
- 1560-00-187-6982 MPN 151-33570-1Mlg Door Hook
- 1560-00-307-2317 MPN 161-54114-10Aircraft Stiffener
- 1560-00-732-9825 MPN 265-170007-007Aircraft Structural Component Bracket
- 1560-00-760-0883 MPN 277-300010-501Inlet Assembly
- 4920-01-155-2051 MPN 46A63000-001Test Adapter
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-113-6216 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S37S3A1 | Boeing Company, The |
7S37S3A1 | Boeing Company, The |