NSN 5305-00-115-6033
High Torque Screw
Aluminum grommet fitted to bearing surface of head.
Manufacturer part number 51B293-5 for national stock number 5305001156033.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-115-6033.
-
MPN or Model
51B293-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.572 inches and 0.619 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.375 inches and 0.387 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.312 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2 cl3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-805-3839 MPN 51B221-9HMachine Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-386-2977 MPN AIC1700-5-12Close Tolerance Screw
- 5305-01-417-2491 MPN TX1026V4-19AClose Tolerance Screw
- 5305-01-435-5755 MPN BACB30LU8-28Close Tolerance Screw
- 5305-01-435-6313 MPN BACB30LU9-21Close Tolerance Screw
- 5305-01-435-6493 MPN BACB30LU9-25Close Tolerance Screw
- 5305-01-435-6611 MPN BACB30LU9-26Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-115-6033 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B293-5 | Northrop Grumman Technical Services, |
51B293-5 | Northrop Grumman Systems Corporation |
51B293-5 | Monadnock Company, The |
51B293-5 | Sps Technologies, Llc |
51B293-5 | Arconic Global Fasteners & Rings, |
51B293-5 | Huck International, Inc. |
51B293-5 | Sps Technologies, Llc |
51B293-5 | Hi-shear Corporation |
51B293-5 | Sps Technologies, Llc |
51B293-5 | Alcoa Global Fasteners, Inc. |
51B293-5 | Northrop Grumman Systems Corporation |