NSN 5305-00-120-1651
High Torque Screw
Between 0.765 inches and 0.812 inches fastener length, flat countersunk head style, between 0.280 inches and 0.303 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HT111AR3-6 for national stock number 5305001201651.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-120-1651.
-
MPN or Model
HT111AR3-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 0.765 inches and 0.812 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.303 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches top of head -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2401 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-135-1085 MPN NAS1190-06P8LSocket Head Cap Screw
- 5305-00-340-4767 MPN NAS1101E3-8Machine Screw
- 5305-00-541-9067 MPN NAS1189E08P7LSocket Head Cap Screw
- 5305-00-754-2071 MPN NAS1203-9WClose Tolerance Screw
- 5305-00-913-7974 MPN NAS1101C3-14Machine Screw
- 5305-00-921-0007 MPN NAS1189-6T12LSocket Head Cap Screw
- 5305-01-015-6645 MPN S5008-4-5Close Tolerance Screw
- 5305-01-101-3328 MPN HT4068-6-16AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-120-1651 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT111AR3-6 | Hi-shear Corporation |