NSN 5305-00-121-7745
High Torque Screw
Between 1.073 inches and 1.103 inches fastener length, flat chamfer head style, between 0.306 inches and 0.313 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number 7S32-3A12H for national stock number 5305001217745.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-121-7745.
-
MPN or Model
7S32-3A12H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 1.073 inches and 1.103 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.306 inches and 0.313 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Hole Diameter
0.046 inches -
Locking Feature
Pellet threads or strip threads or patch threads -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Round -
Material
Steel comp 4130 -
Material Specification
Mil-s-6758, cond d4 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-035-3873 MPN 180-34222Switch Actuator Arm
- 1680-00-069-7615 MPN 192-53209-151Aircraft Ejection Seat
- 1560-00-121-8296 MPN 88-48803Fuel Engine Se Tube
- 1560-00-185-2474 MPN 165-14608-1Aircraft Access Cover
- 1560-00-185-3466 MPN 52-31109-1Fuselage Ho Fitting
- 4920-00-600-1422 MPN E2872-11Hydraulic System Components Test Stand
- 1560-00-732-9825 MPN 265-170007-7Aircraft Structural Component Bracket
- 1560-00-796-0396 MPN 265-390002-101Aircraft Speed Brake
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-121-7745 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S32-3A12H | Boeing Company, The |