NSN 5305-00-121-8895
High Torque Screw
Between 1.543 inches and 1.563 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, locking feature: detent ball grip.
Manufacturer part number MS27577-4-18 for national stock number 5305001218895.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-121-8895.
-
MPN or Model
MS27577-4-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.282 inches and 0.333 inches -
Fastener Length
Between 1.543 inches and 1.563 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.125 inches and 1.141 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.443 inches first hole and 1.563 inches first hole -
Surface Finish
63.0 microinches top of head -
Material
Steel -
Material Specification
Mil-b-83050 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-512-6208 MPN CA2654-5-18Close Tolerance Screw
- 5305-01-382-9722 MPN CA2230-10-8-12Setscrew
- 5305-01-490-5265 MPN CA2296-10-6-9Panel Screw Assembly
- 5306-01-102-2676 MPN SS27576-4-12Machine Bolt
- 5306-01-162-3964 MPN CA7000-8-44Shear Bolt
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-007-1589 MPN NAS1102E02-7PMachine Screw
- 5305-00-007-3025 MPN NAS1102C04-6PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-121-8895 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27577-4-18 | National Aerospace Standards |
106466-4-18 | Sps Technologies, Llc |
AS195-4-18 | Avibank Mfg., Inc. |
MS27577-4-18 | Military Standards |
CA4520-4-18 | Arconic Global Fasteners & Rings, |