NSN 5305-00-123-9657
High Torque Screw
Between 1.125 inches and 1.172 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number 66117H6-10 for national stock number 5305001239657.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-123-9657.
-
MPN or Model
66117H6-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.433 inches -
Fastener Length
Between 1.125 inches and 1.172 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-438-7673 MPN 38194A-4Electrical Plug Connector
- 5305-00-008-9116 MPN NAS1190E04T3LSocket Head Cap Screw
- 5305-00-150-3242 MPN 106334-8-23DClose Tolerance Screw
- 5305-00-345-2365 MPN HT4024L3D4Close Tolerance Screw
- 5305-00-420-8249 MPN NAS1133V26Close Tolerance Screw
- 5305-00-541-9194 MPN 106706H7-13Close Tolerance Screw
- 5305-01-181-6100 MPN 12705L-8C-32Shoulder Screw
- 5305-01-219-2962 MPN HT4068-4-4Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-123-9657 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
66117H6-10 | Sps Technologies, Llc |
3M263-6-10 | Boeing Company, The |
66117H6-10 | Sps Technologies, Llc |