NSN 5305-00-127-7510
High Torque Screw
Between 1.108 inches and 1.128 inches fastener length, flat countersunk head style, between 0.629 inches and 0.634 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number HR112-5-11 for national stock number 5305001277510.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-127-7510.
-
MPN or Model
HR112-5-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.613 inches and 0.643 inches -
Fastener Length
Between 1.108 inches and 1.128 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.629 inches and 0.634 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.485 inches and 0.495 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Material Specification
Ams 6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-6214 MPN AIC617-22Externally Relieved Body Screw
- 5305-00-080-9291 MPN 3MFR333CFA7Machine Screw
- 5305-00-551-4842 MPN HT4025L4-11Close Tolerance Screw
- 5305-00-761-3556 MPN NAS1101-3-9Machine Screw
- 5305-00-823-5809 MPN NAS1102-06-14Machine Screw
- 5305-00-929-1757 MPN NAS1101-3H14Machine Screw
- 5305-01-014-8454 MPN NAS1101E02-7Machine Screw
- 5305-01-097-8201 MPN NAS1101E3-28PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-127-7510 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR112-5-11 | Hi-shear Corporation |
HR112-5-11 | Sps Technologies, Llc |
HR112-5-11 | Alcoa Global Fasteners, Inc. |
C3606-11 | Lockheed Martin Corporation |