NSN 5305-00-127-8012
Panel Screw
Between 0.343 inches and 0.375 inches fastener length, pan head style, between 0.205 inches and 0.219 inches head diameter, head height: between 0.070 inches and 0.080 inches .
Manufacturer part number G7123-180 for national stock number 5305001278012.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-127-8012.
-
MPN or Model
G7123-180
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.188 inches and 0.230 inches -
Fastener Length
Between 0.343 inches and 0.375 inches -
Head Style
Pan -
Head Diameter
Between 0.205 inches and 0.219 inches -
Head Height
Between 0.070 inches and 0.080 inches -
First Diameter From Head
Between 0.075 inches and 0.080 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.145 inches and 0.155 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Externally Relieved Body Diameter Quantity
1 -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 302 or steel comp 303 or steel comp 304 -
Material Specification
66 federal standard all material responses -
Thread Series Designator
Unc
More from these suppliers
- 5985-00-480-4693 MPN G128-334-001Waveguide Assembly
- 5975-01-523-1077 MPN H522A066-01Electrical-electronic Equipment Chassis
- 5935-01-431-7774 MPN A336A561-101Electrical Connector Cable Clamp
- 5905-01-398-1208 MPN A600A182-101Film Fixed Resistor Network
- 5940-00-549-9551 MPN 142-4-23Stud Terminal
- 5905-00-781-9146 MPN C600007491Inductive Wire Wound Fixed Resistor
- 4920-01-004-8875 MPN C704921013Special Comparator
- 5935-01-132-7681 MPN A520A245-102Electrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-127-8012 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
G7123-180 | Singer Co The Kearfott Div |
G7123-180 | Bae Systems Information And |
G7123-180 | Kearfott Corporation |
G7123-180 | Singer Co The Kearfott Div |
G7123-180 | Bae Systems Information And |
G7123-180 | Kearfott Corporation |