NSN 5305-00-130-7468
Panel Screw
Between 0.859 inches and 0.891 inches fastener length, binding head style, between 0.274 inches and 0.290 inches head diameter, head height: between 0.071 inches and 0.080 inches .
Manufacturer part number 863064 for national stock number 5305001307468.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-130-7468.
-
MPN or Model
863064
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.296 inches and 0.328 inches -
Fastener Length
Between 0.859 inches and 0.891 inches -
Head Style
Binding -
Head Diameter
Between 0.274 inches and 0.290 inches -
Head Height
Between 0.071 inches and 0.080 inches -
First Diameter From Head
Between 0.083 inches and 0.088 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.531 inches and 0.595 inches -
Internal Drive Style
Slot -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 303 -
Material Specification
Asatm a582 assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-470-9480 MPN 4006559-52Composition Fixed Resistor
- 5930-01-075-9542 MPN 4019192Push Switch
- 5930-01-112-9956 MPN 4038698-123Push Button
- 5950-01-416-4392 MPN 8511966-1Electrical Coil
- 5985-01-583-6776 MPN 8539030-920Antenna Mast Dism
- 5905-00-203-5753 MPN 4006028-371Film Fixed Resistor
- 5905-01-012-1119 MPN 2500169-390Film Fixed Resistor
- 5905-01-624-0855 MPN 8521864-361Film Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-130-7468 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
863064 | Honeywell International Inc. |
863064 | Lockheed Martin Corporation |