NSN 5305-00-135-1041
Bolt Stove
Between 1.160 inches and 1.190 inches fastener length, flat countersunk head style, between 0.389 inches and 0.394 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number 7S39-4-12 for national stock number 5305001351041.
Datasheet
-
Product description
Machine Screw NSN 5305-00-135-1041.
-
MPN or Model
7S39-4-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 1.160 inches and 1.190 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.389 inches and 0.394 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 4130 -
Screw Material Specification
Mil-s-6758 military specification single material response -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-121-0394 MPN 88-33565Landing Gear Lo Rod
- 1560-00-185-9172 MPN 151-48180-1Fuel Tank Block
- 1560-00-326-4805 MPN 161-48321Relief Valve Bolting Ring
- 1560-00-337-3690 MPN 172-54097-11Electrical Console Shield
- 1680-01-006-3039 MPN 65E34283-13Aircraft Seat Webbing Assembly
- 1560-01-137-7602 MPN 202-17070Aircraft Structural Component Support
- 4920-01-168-0443 MPN R-TBD-622Control Test Set
- 5985-01-195-9898 MPN LE413-0273-0001Waveguide Assembly
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-135-1041 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S39-4-12 | Boeing Company, The |