NSN 5305-00-135-1042
High Torque Screw
Between 1.535 inches and 1.565 inches fastener length, flat countersunk head style, between 0.390 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 7S39-4-18 for national stock number 5305001351042.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-135-1042.
-
MPN or Model
7S39-4-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 1.535 inches and 1.565 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.347 inches first hole and 1.397 inches first hole -
Material
Steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-400-9388 MPN 265-240005Airfoil Rib
- 4920-00-522-2213 MPN E2845Aircraft Maintenance Fixture
- 1560-00-796-8974 MPN 246-52231-7Longeron Co Support
- 1560-00-859-7243 MPN 265-220423-11Elevator Pin Assembly
- 1560-01-144-0747 MPN 265-312153-5Aircraft Structural Component Support
- 1560-01-164-2175 MPN L5341010-003Aircraft Structural Component Support
- 4920-01-207-3389 MPN 51C03000Test Adapter
- 4920-01-211-9783 MPN 4755100-001Test Adapter
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-135-1042 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S39-4-18 | Boeing Company, The |